AND226G standard bright led lamps purdy electronics corporation ? 720 palomar avenue ? sunnyvale, ca 94085 tel: 408.523.8200 ? fax: 408.733.1287 ? email@purdyelectronics.com ? www.purdyelectronics.com 7/18/07 cathode 3.5 ? 2.0 ? 1.6 0.5 27 min 5.0 2.54 tolerance: 0.2 2.8 4.0 0.75 1 max 1.5 typ 1.95 AND226G special shape 2mm flat top features ? low power requirement ? special shape ? all plastic molded lens ? gap C green ? rohs compliant optical characteristics (t = 25c) part number color lens desc. axial luminous intensity (mcd) test condition (i f Cma) viewing angle 2 1/2 (deg) led lens min. typ. AND226G green green diffused 2.0 4.0 10 70 precaution please be careful of the following: 1. soldering temperature: 260c max; soldering time: 3 sec. max; soldering portion of lead: up to 2 mm from the body of the devi ce. 2. the lead can be formed up to 5 mm from the body of the device without forming stress. soldering should be performed after the lead forming . absolute maximum ratings (t a = 25c) characteristics symbol rating unit forward current i f 25 ma reverse voltage v r 5v power dissipation p d 105 mw operating temperature t opr -40 to +85 c storage temperature range t stg -40 to +85 c electro-optical characteristics (t a = 25c) characteristics symbol test condition AND226G unit typ. max. forward voltage v f i f = 20ma 2.2 2.5 v reverse current i r v r = 5 v C10a peak emission wavelength p i f = 20ma 565 C nm spectral line half width i f = 20ma 30 C nm weight: 0.15 g unit: mm product speci?cations contained herein may be changed without prior notice. it is therefore advisable to contact purdy electronics before proceeding with the design of equipment incorporating this produc t.
AND226G standard bright led lamps purdy electronics corporation ? 720 palomar avenue ? sunnyvale, ca 94085 tel: 408.523.8200 ? fax: 408.733.1287 ? email@purdyelectronics.com ? www.purdyelectronics.com 7/18/07 i v vs. t c 3 2 1 0.5 0.4 0.3 -20 0 20 40 60 80 case temperature t c ( c) relative luminous intensity i v i v vs.t a ambient temperature t a ( c) allowable forward current i f (ma) 40 30 20 10 0 0 20406080100 relative luminous intensity vs. wavelength wavelength (nm) 1.0 0.8 0.6 0.4 0.2 0 520 540 560 580 600 620 640 660 680 700 720 740 760 780 800 relative luminous intensity t a = 25 660 680 700 720 740 760 780 800 t a = 25 660 680 700 720 740 760 780 800 5 2 1 0.5 0.2 0.1 1 2510 forward current i f (ma) relative luminous intensity i v 20 50 i v vs. i f 2.3 1.7 1.8 1.9 2.0 2.1 2.2 1 3 2 5 10 30 20 50 forward voltage v f (v) i f vs. v f forward current i f (ma) t a = 25 c
|